Graphtec Craft ROBO Driver OPS653 Ver. 3.00
for Microsoft Windows 2000 / Windows XP/ Windows Vista

Thank you for choosing the Graphtec OPS653 Craft ROBO Driver. 

The README.TXT file in each directory contains instructions on installation and
operation as well as other notes. Be sure to read them carefully before 
installing or using this driver.

Before you begin installation, check that the program disk contains the 
following:

  WIN2K_VISTA\DISK1            For Windows 2000 / Windows XP / Windows Vista
  WIN2K_VISTA\GPCR.GPD
  WIN2K_VISTA\GPCR.INF
  WIN2K_VISTA\GPCR.DLL
  WIN2K_VISTA\GPCRUI.DLL
  WIN2K_VISTA\GPCRUI.CHM
  WIN2K_VISTA\GTCCRMON.DLL
  WIN2K_VISTA\README.TXT

  * Supported OS
      Windows 2000 Professional, Windows XP, or Windows Vista
  * Craft ROBO does not operate under Windows 98/Me, 3.1/95 or Windows NT.
  * Operation with other than the included driver is not guaranteed.
  * Do not connect multiple Craft ROBO units to a single computer.
  * Operation is not guaranteed if the Craft ROBO is connected to a USB hub or to 
    a USB add-on card. 

END
