IMPORTANT: Please REFRESH your browser when accessing the links below to avoid an uploading error.
Sure Cuts A Lot:
The following KNK Maxx Air with Sure Cuts A Lot User Manual January 30, 2018 Version reflects SCAL 4.069. The Maxx Air also works with SCAL5 so for details on the additional features available to SCAL5 owners, note the link to the newer user manual covering that version of the software.
Chapters 1, 2, 11 and 12 are specific to the KNK Maxx Air. Chapters 3 – 10 are SCAL only and will be useful to all owners of SCAL4 software. Note that you may need to refresh your browser to see the latest version. Also, this user manual is over 300 pages and will require some time to appear in your browser.
Maxx Air with SCAL4 User Manual
Because the SCAL5 and 6 upgrades only affected designing features versus any functions directly related to the operation of the Maxx Air, updated Maxx Air manuals have not been written. Instead, if you need to look up any of the additional SCAL “goodies”, please refer to my SCAL Support page:
SCAL Manuals, videos, tutorial and more: SCAL Support page
Make The Cut:
The following February 25, 2014 Maxx Air user manual reflects MTC 4.6.1. Note that you may need to refresh your browser to see the latest version. Also, this user manual is over 300 pages and will require some time to appear in your browser.
Chapters 1, 2, 9 and 10 are specific to the KNK Maxx Air. Chapters 3 – 8 are Make The Cut only and will be useful to all owners of Make The Cut software.
