Page 9 - Klic-N-Kut User Manual

 DO NOT cut any materials that have staples or other embellishments attached.

 DO NOT touch the cutter with a magnet.
 DO NOT allow small items to fall into the cutter.
 TURN OFF the cutter when not in use.

1.04 Parts of the KNK Zing Air

Front

Limit Switch (red): Blade Holder Seat (aka Jaw)
One on each side Press Ring and Front Screw (black) Power Button
(rubber): Total of 2

Left Right
End End
Cap Cap

Blade Carriage
Mat/Material Guide: Cutting Strip Pinch Wheels: Pinch Wheel Lever (blue):
One on each side (white) Three in total One on each side

 Blade Carriage: Moves the Blade Holder Seat left and right
 Blade Holder Seat (Jaw): Holds the blade holder, test pen, markers, and other tools
 Front Screw: Tightens blade holder, test pen, markers, and other tools into blade holder seat
 Cutting Strip: Protects blade from cutting metal beneath
 Limit Switches: Provide a buffer between blade carriage and end cap
 Mat/Material Guides: Used to position the mat
 Pinch Wheels: Grip mat or material so that grit shaft (beneath) will feed mat or material in and out
 Pinch Wheel Levers: Lift pinch wheels up and down for loading of mat or material
 Power Button: Turns cutter on or off
 Press Rings: Help keep material from lifting during cutting

Back

Power Port USB Port

9