Page 185 - Klic-N-Kut User Manual

8.10 Conical Warp

 The Conical Warp feature can be used for shaping designs to fit around conical shapes, which are tubular
shapes in which the top is a different diameter than the bottom. What makes this feature especially fun to
use in designing is the incredible 3D simulation, as you will see in the Tumbler Wrap example which follows
below.

 The Conical Warp feature is accessed in the following ways:

 Click on the Conical Warp icon on the Magic Toolbar
 Press Ctrl+Q
 Right click on the screen and select Shape Magic>Conical Warp

 Go to Edit> Shape Magic>Conical Warp

Tumbler Wrap

 A design has been created for the wrap. The pumpkin is from the free Create-A-Card set in the Lettering
Delights window. A random font was chosen to create the lettering:

 Select the entire design and then click on the Conical Warp icon. The follow window opens:

Select the desired View.
Settings may be saved for
future use.

Enter Top and Bottom Diameters,
as well as the Height of the
Tumbler, along the actual surface.

The design Scroll to move the Position of the
appears on Design or modify the Size.
the wrap
outline If the design extends beyond the
bottom, you have the option to
trim the overhang.

Scroll to decrease the
Width of the wrap
Option to import the outside shape of the wrap/cone

185