Page 15 - KNK Groove with MTC User Manual

 If you lose your registration number and you need to install MTC onto another computer, please go the
same prior link and click on “Recover Pin.”
 It’s now time to connect the KNK to your computer. Go to Section 1.10.

Installing on a Mac

 There are three things to install: the MTC program, the MTC Bridge, and the KNK Plug-in. These are
contained within one file which can be downloaded here:
http://www.iloveknk.com/Support/Software/Make-The-Cut/MTC-Mac/
 Before installing, please read and follow instructions regarding Apple’s Gatekeeper software (scroll to Mac
Users, please note the following error) at the following link:
http://knkusa.com/resources/
 After the download has completed, open the Downloads folder and launch the downloaded MTC dmg file.
 A blue window will open with instructions to use for installing the software and bridge. Watch the following
video first so that you can better visualize what needs to be done. This video was originally designed for the
Zing, however, all steps are the same, with the exception of testing the connection. Wait to do this from
within MTC.

Watch this video!
BUT remember, it
works a bit
differently on your
KNK!

 In the Bridge program, after selecting the tty listing under COM 1, be sure to click on Save at the bottom of
that window:

Select the tty
connection here.

Then, click on Save.

15