Page 31 - Klic-N-Kut User Manual

Knife Point

 This is the mode recommended for most applications as it economizes the use of your cutting materials.
 Shapes can be located anywhere on the screen, including outside the Virtual Mat. The shapes will be
moved and cut to where you set the origin on the material. The origin is set using the position of the blade
tip.
 When more than one shape will be cut, the shape closest to the origin will be cut at the origin and any other
shapes will be cut the distance and direction from that shape as positioned on the screen. The following
figures show examples of where images will cut. Use the arrow on the Virtual Mat as a guide to the
direction to insert the actual mat or material into your Zing.

 Knife Point – Landscape Mode
Feed the mat this direction into the Zing

Indicates Landscape mode

Shapes are cut to
align with the
origin you set on
the Zing.

Origin set here
using the blade tip

Location of shapes on the screen Where shapes are drawn or cut on material

 Knife Point – Portrait Mode

Feed the mat this direction into the Zing
Indicates
Portrait
mode

Shapes are
cut to align
with the
origin you set
on the Zing.

Origin set
here using
the blade tip

Location of shapes on the screen Where shapes are drawn or cut on material

31