Page 58 - Klic-N-Kut User Manual

Click on the these buttons
to see other page

thu mbnails within the file

 Zipped files will not show thumbnails of the file contents. Thus, you will need to extract zipped files first in
order to have these thumbnails.

 Hidden layers will not appear in the thumbnails. So, before saving your files, you may wish to make all
layers visible. Refer to Section 3.12.

3.07 Saving MTC Files

 A file can be saved in MTC format by using any of the following:

 Click on the Save icon on the File toolbar
 Right click on the project tab on the Tab bar and select Save or Save As from the menu
 Press Ctrl+S
 Go to File>Save or File>Save As.

 If you’ve made changes and wish to save under a different file name, choose File>Save As. Name the file,
choose a location, and click on Save.
 If you wish to save all of your open projects, go to File>Save All or right click on a project tab on the Tab
Bar and select Save All from the menu. The various windows in which you’ve made changes will then open,
in sequence, with the option to save the changes or not or cancel the saving process for that file.

 You can also turn on an auto-saving option by going to Help>Advanced>Advanced Settings. The setting
is located under Automatic Project Saving. Check the box next to Enable Automatic Saving.
Check box to bring up
Automatic Saving settings

 This is a very good idea when doing extensive designing or editing of files. It’s not unusual for graphic
programs to occasionally crash or the possibility of a sudden power outage to occur. Once you check the
box, the following settings window will open:
Enter location where
Enter timing for backups will be saved
frequency of saves
Enter Maximum Saves
Click on OK before deleting older ones

 To change the save settings, uncheck the Enable Automatic Saving box and then recheck the box so that
the Automatic Save Settings window will reopen and changes can then be made.
58